Peel and Stick L.E.D. Bulb

Item Specs:

• 8-20 volts
• AC or DC
• 1 in. x 0.5 in. x 0.75 in.
• Available Colors: Warm White, Cool White, Red, Green, & UV Purple

Installation

This product is so universal, there is no one correct way to install it.

Simply:

1. Find an appropriate place for your "Peel & Stick" LED light

2. Remove the green sticky backing from the rear of the light. Try not to touch the adhesive or it will reduce the sticking ability. Gently press it into place.

3. Attach the wires to an AC or DC power source of 8-20v. FOR AC operators, it does not matter which wire attaches to which on the source. The circuitry allows the LED to operate either way. FOR DC operators, you must observe the correct polarity. LED's require correct polarity to operate.

---

Where do you want to go next?

Back to Product Selection Page
Visit my eBay store!